View DCJPRM094_7679548.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

dura-con all-plastic strip connectors metal shell mil-c-83513 connectors terminal blocks microedge .050" d-microminiature
5 5-1 dura-con introduction cinch dura-con tm connectors are designed for applications that require a rugged, durable, and high-performance interconnect. dura-con is the ideal connector for applications where weight and space must be kept to a minimum while maintaining maximum reliability. miniaturized airborne electronics and data processing equipment, where shorter signal paths are needed, represent typical applications for these unique connectors. the heart of the dura-con system is the dura-con pin contact. the cinch dura-con pin contact is made from a precision minia- ture spring cable with a welded tip. the expanded cable provides seven spring members peripherally around the pin so that con- tact is maintained with the mating socket wall no matter what radial forces are applied. this spring may be flexed many times without any evidence of metal fatigue. reliable mating is further ensured by protecting the pin contact in a tightly toleranced recessed cavity. cinch?s family of dura-con connectors includes mil-c-83513 series connectors along with our own commercial equivalents. the commercial dura-con product line offers an expanded range of termination and hardware options for all-plastic and metal shell wire versions and right-angle and straight pc board mount ?terminal blocks?. cinch also packages the dura-con contact in a very low profile plastic strip connector on .050" centers and in a line of high-density microminiature edge (microedge) bo ard connectors that meet the requirements of mil-c-55302. cinch has created a line of plastic and metal shell dura-con connector savers for very high mating cycle applications such as test equipment. termination options: cinch offers the following termination methods for its dura-con connectors: insulated wire - insulated wire is crimped to the dura-con contacts then epoxy backpotted at the factory. wire is available in standard lengths of 18, 24, 36, and 48 inches. uninsulated wire - 24 awg, gold-plated, uninsulated wire is crimped to the dura-con contact at the factory. wire is available in standard lengths of 0.5, 1.0, and 2.0 inches. this option allows the user greater flexibility when installing the connector. solder cup - for applications that require the lowest contact resistance, cinch offers dura-con connectors with solder cups for termination by the user. call toll free: 1 (800) 323-9612 dura-con is a trademark of cinch connectors.
5-2 call toll free: 1 (800) 323-9612 5 dura-con introduction custom capabilities: standard cinch dura-con connectors satisfy a wide variety of applications. cinch?s line of dura-con d-microminiature connectors is one of the most versatile in the industry. there are over 50,000 possible combinations of cinch standard options such as connector type, size, materials, hardware, and termination. when special application requirements arise, cinch dura-con connectors take this versatility to the next level. whether specific needs entail new variations of simple end-to-end connector assemblies or more complex and intricate harness assemblies, cinch connector division has the state-of-the-art engineering resources and research facilities in place to meet your needs. cinch approaches your business with a well-defined goal: to ensure the integrity of your design and to execute our contribution to it in a responsible, cost-effective manner. this philosophy has led cinch to a position of industry leadership. for complete information regarding the total capabilities of the dura-con connector series, or for custom application assistanc e, contact your nearest cinch connectors sales office.
5-4 call toll free: 1 (800) 323-9612 dura-con high reliability all-plastic f eatures both plug and socket available in 9, 15, 21, 25, 31, 37, and 51 positions. termination styles - solder cup, gold-plated solid wire, and insulated stranded wire. several styles of mounting hardware are available for cable-to-cable, cable-to-board mount, and cable-to-panel mount applications. high-performance dura-con twist-pin contact. economical all-plastic shell for lightweight applications where no shielding is required. meets requirements of mil-c-83513 except where noted. .050" (1.27mm) density solder cup/wire d-microminiature m aterials insulator: ul94v-0 rated glass-filled polyester contacts: pins - copper alloy, sockets - copper alloy (machined) contact plating: .000050 in gold e lectrical current rating: 3 amps maximum withstanding voltage: 600 vac rms @ sea level contact resistance: 8 milliohms maximum change e nvironmental operating temperature: -55 c to +135 c m echanical individual contact: 6 oz. (170.40 g) maximum insertion; 0.5 oz. (14.20 g) minimum withdrawal mating / unmating force: see table maximum minimum no. of mating force unmating force contacts lb. kg lb. kg 9 5.63 2.56 .28 .13 15 9.38 4.26 .47 .21 21 13.13 5.96 .66 .30 25 15.63 7.10 .78 .35 31 19.38 8.80 .97 .44 37 23.13 10.50 1.16 .53 51 31.88 14.47 1.59 .72
cinc h dura-con d connector insulator t ype *d = thermoplastic glass reinforced mounting t ype *a = screw mount flange no. of contacts 9, 15, 21, 25, 31, 37, 51 contact t ype p ? pin (plug) s ? socket (receptacle) wire siz e in a wg 5 = 25 awg solid copper 6 = 26 awg stranded s = solder cup (skip to mounting hardware) wire t ype e = mil-w-16878/4, 7 strand c = solid copper - uninsulated ( consult factory for non-standard wire types) 5-5 call toll free: 1 (800) 323-9612 dura-con high reliability all-plastic .050" (1.27mm) density solder cup/wire d-microminiature dc d a 37 p 6 e 2 -18.0 k contact arrangements (face view of pin insulator) (use reverse order for socket) mounting har d ware** b = no hardware f = float mount r = reverse float mount k = jackscrew (standard) l = jackscrew (low profile) p = jackpost, mil-c-83513/5-07 lead length in inches *** 00.5 solid copper wire only 01.0 solid copper wire only 02.0 solid copper wire only 18.0 stranded wire only 24.0 stranded wire only 36.0 stranded wire only 48.0 stranded wire only insulation color or wire finish 1 = white *2 = yellow (stranded wire) 3 = tin-plated *4 = gold-plated (solid wire only) *5 = color coded per mil-std. (681) system 1. (stranded wire only) * - indicates cinch std. option. ** - see p. 5-12 for std. hardware dims. see p. 5-13 for non-std. hardware & p. 5-31 for mil spec. hardware both sold separately. *** - length tolerance: solid wire = 3/32?, standard wire = 1/4?. ordering information
5-6 5 call toll free: 1 (800) 323-9612 dura-con high reliability all-plastic .050" (1.27mm) density solder cup/wire d-microminiature a b max. c d e f max. +.010 (.254) no. of + .010 (.254) -.018 (.457) + .005 (.127) + .010 (.254) contacts in mm in mm in mm in mm in mm in mm 9 plug .778 19.76 .292 7.42 .398 10.11 .565 14.35 .208 5.28 .173 4.39 9 socket .778 19.76 .376 9.55 .398 10.11 .565 14.35 .208 5.28 .173 4.39 15 plug .928 23.57 .442 11.23 .548 13.92 .715 18.16 .208 5.28 .173 4.39 15 socket .928 23.57 .526 13.36 .548 13.92 .715 18.16 .208 5.28 .173 4.39 21 plug 1.078 27.38 .592 15.04 .698 17.73 .865 21.97 .208 5.28 .173 4.39 21 socket 1.078 27.38 .676 17.17 .698 17.73 .865 21.97 .208 5.28 .173 4.39 25 plug 1.178 29.92 .692 17.58 .798 20.27 .965 24.51 .208 5.28 .173 4.39 25 socket 1.178 29.92 .776 19.71 .798 20.27 .965 24.51 .208 5.28 .173 4.39 31 plug 1.328 33.73 .842 21.39 .948 24.08 1.115 28.32 .208 5.28 .173 4.39 31 socket 1.328 33.73 .926 23.52 .948 24.08 1.115 28.32 .208 5.28 .173 4.39 37 plug 1.478 37.54 .992 25.20 1.098 27.89 1.265* 32.13 .208 5.28 .173 4.39 37 socket 1.478 37.54 1.076 27.33 1.098 27.89 1.265* 32.13 .208 5.28 .173 4.39 51 plug 1.428 36.27 .942 23.93 1.048 26.62 1.215 30.86 .250 6.35 .220 5.59 51 socket 1.428 36.27 1.026 26.06 1.048 26.62 1.215 30.86 .250 6.35 .220 5.59 connector dimensions - plastic shell plug socket
5-7 5 call toll free: 1 (800) 323-9612 dura-con high reliability all-plastic .050" (1.27mm) density solder cup/wire d-microminiature panel mounting dimensions panel cutout dimensions figure 1. front mounting figure 2. rear mounting figure 3. edgeboard mounting ab c figure +.004 (.101) +.004 (.101) +.005 (.127) no. of number -.000 (.000) -.000 (.000) -.000 (.000) contacts in mm in mm in mm 1 .408 10.36 .172 4.37 .570 14.48 9 2 .373 9.47 .216 5.49 .570 14.48 3 - - - - .570 14.48 1 .558 14.17 .172 4.37 .720 18.29 15 2 .523 13.28 .216 5.49 .720 18.29 3 - - - - .720 18.29 1 .708 17.98 .172 4.37 .870 22.10 21 2 .674 17.12 .216 5.49 .870 22.10 3 - - - - .870 22.10 1 .808 20.52 .172 4.37 .970 24.64 25 2 .774 19.66 .216 5.49 .970 24.64 3 - - - - .970 24.64 1 .958 24.33 .172 4.37 1.120 28.45 31 2 .924 23.47 .216 5.49 1.120 28.45 3 - - - - 1.120 28.45 1 1.108 28.14 .172 4.37 1.270 32.26 37 2 1.074 27.28 .216 5.49 1.270 32.26 3 - - - - 1.270 32.26 1 1.058 26.87 .215 5.46 1.220 30.99 51 2 1.024 26.01 .259 6.58 1.220 30.99 3 - - - - 1.220 30.99
5-8 dura-con high reliability metal shell f eatures both plug and socket available in 9, 15, 21, 25, 31, 37, 51, and 100 positions. several styles of mounting are available for cable-to-cable, cable-to-panel mount, and cable-to-board mount. aluminum shell provides extra strength and emi/rfi shielding capability. plating options available. silicone elastomer compression interfacial seal protects contacts from moisture and humidity and isolates contacts from each other and the metal shell. meets requirements of mil-c-83513 except where noted. rugged twist-pin contacts resistant to shock and vibration make metal shell dura-con an excellent choice for harsh environments such as airborne or space applications. .050" (1.27mm) density solder cup/wire d-microminiature m aterials insulator: ul94v-0 rated glass-filled polyester or diallyl phthalate contacts: pins - copper alloy, sockets - copper alloy (machined) contact plating: .000050 in gold shell: aluminum alloy shell plating: yellow chromate over cadmium (std.) or electroless nickel e lectrical current rating: 3 amps maximum withstanding voltage: 600 vac rms @ sea level contact resistance: 8 milliohms maximum e nvironmental operating temperature: -55 c to +135 c m echanical individual contact: 6 oz. (170.40 g) maximum insertion; 0.5 oz. (14.20 g) minimum withdrawal mating / unmating force: see table maximum minimum no. of mating force unmating force contacts lb. kg lb. kg 9 5.63 2.56 .28 .13 15 9.38 4.26 .47 .21 21 13.13 5.96 .66 .30 25 15.63 7.10 .78 .35 31 19.38 8.80 .97 .44 37 23.13 10.50 1.16 .53 51 31.88 14.47 1.59 .72 100 62.50 28.38 3.13 1.42 call toll free: 1 (800) 323-9612
cinc h dura-con d connector insulator t ype c = diallyl phthalate glass-reinforced d = thermoplastic glass-reinforced mounting t ype m = screw mount metal shell no. of contacts 9, 15, 21, 25, 31, 37, 51, 100 contact t ype p = pin (plug) s = socket (receptacle) wire siz e in a wg 5 = 25 awg solid copper 6 = 26 awg stranded s = solder cup (skip to mounting hardware) wire t ype c = solid copper (uninsulated) e = mil-w-16878/4, 7 strand (consult factory for non-standard wire types) 5-9 call toll free: 1 (800) 323-9612 dura-con high reliability metal shell .050" (1.27mm) density solder cup/wire d-microminiature contact arrangements (face view of pin insert) (use reverse order for socket side) shell plating *no letter = yellow chromate over cadmium n = electroless nickel mounting har d ware** b = no hardware f = float mount r = reverse float mount k = jackscrew (standard) l = jackscrew (low profile) p = jackpost, size 9 through 51 mil-c-83513/5-07 size 100 mil-c-83513/5-17 lead length in inches *** 00.5 solid copper wire only 01.0 solid copper wire only 02.0 solid copper wire only 18.0 stranded wire only 24.0 stranded wire only 36.0 stranded wire only 48.0 stranded wire only insulation color or wire finish 1 = white *2 = yellow (stranded wire) 3 = tin-plated *4 = gold-plated (solid wire) *5 = color coded per mil-std. 681, system 1. (stranded wire only) ordering information * - indicates cinch std. option. ** - see p. 5-12 for std. hardware dims. see p. 5-13 for non-std. hardware & p. 5-31 for mil spec. hardware both sold separately. *** - length tolerance: solid wire = 3/32?, standard wire = 1/4?. dc d m 37 p 6 e 2 -18.0 k n
5-10 5 call toll free: 1 (800) 323-9612 dura-con high reliability metal shell .050" (1.27mm) density solder cup/wire d-microminiature connector dimensions - metal shell a b max. c d e f max. +.010 (.254) no. of + .010 (.254) -.018 (.457) + .005 (.127) + .010 (.254) contacts in mm in mm in mm in mm in mm in mm 9 plug .775 19.68 .333 8.46 .390 9.91 .565 14.35 .298 7.57 .270 6.86 9 socket .775 19.68 .396 10.06 .390 9.91 .565 14.35 .298 7.57 .270 6.86 15 plug .925 23.50 .483 12.27 .540 13.72 .715 18.16 .298 7.57 .270 6.86 15 socket .925 23.50 .546 13.87 .540 13.72 .715 18.16 .298 7.57 .270 6.86 21 plug 1.075 27.30 .633 16.08 .690 17.53 .865 21.97 .298 7.57 .270 6.86 21 socket 1.075 27.30 .696 17.68 .690 17.53 .865 21.97 .298 7.57 .270 6.86 25 plug 1.175 29.84 .733 18.62 .790 20.07 .965 24.51 .298 7.57 .270 6.86 25 socket 1.175 29.84 .796 20.22 .790 20.07 .965 24.51 .298 7.57 .270 6.86 31 plug 1.325 33.66 .883 21.16 .940 23.88 1.115 28.32 .298 7.57 .270 6.86 31 socket 1.325 33.66 .946 24.03 .940 23.88 1.115 28.32 .298 7.57 .270 6.86 37 plug 1.475 37.46 1.033 26.24 1.090 27.69 1.265 32.13 .298 7.57 .270 6.86 37 socket 1.475 37.46 1.096 27.84 1.090 27.69 1.265 32.13 .298 7.57 .270 6.86 51 plug 1.425 36.20 .983 24.97 1.040 26.42 1.215 30.86 .341 8.66 .310 7.87 51 socket 1.425 36.20 1.046 26.57 1.040 26.42 1.215 30.86 .341 8.66 .310 7.87 100 plug 2.160 54.86 1.383 35.13 1.432 36.38 1.800 45.71 .384 9.75 .360 9.15 100 socket 2.160 54.86 1.446 36.73 1.432 36.38 1.800 45.71 .384 9.75 .360 9.15 plug socket
5-11 dura-con high reliability metal shell .050" (1.27mm) density solder cup/wire d-microminiature abcd figure +.004 (.101) +.004 (.101) +.005 (.127) +.005 (1.27) no. of number -.000 (.000) -.000 (.000) -.000 (.000) -.000 (.000) contacts in mm in mm in mm in mm 1 .408 10.36 .270 6.86 .570 14.48 - - 9 2 .408 10.36 .256 6.50 .570 14.48 .089 2.26 3 - - - - .570 14.48 - - 1 .558 14.17 .270 6.86 .720 18.29 - - 15 2 .558 14.17 .256 6.50 .720 18.29 .089 2.26 3 - - - - .720 18.29 - - 1 .708 17.98 .270 6.86 .870 22.10 - - 21 2 .708 17.98 .256 6.50 .870 22.10 .089 2.26 3 - - - - .870 22.10 - - 1 .808 20.52 .270 6.86 .970 24.64 - - 25 2 .808 20.52 .256 6.50 .970 24.64 .089 2.26 3 - - - - .970 24.64 - - 1 .958 24.33 .270 6.86 1.120 28.45 - - 31 2 .958 24.33 .256 6.50 1.120 28.45 .089 2.26 3 - - - - 1.120 28.45 - - 1 1.108 28.14 .270 6.86 1.270 32.26 - - 37 2 1.108 28.14 .256 6.50 1.270 32.26 .089 2.26 3 - - - - 1.270 32.26 - - 1 1.058 26.87 .315 8.00 1.220 30.99 - - 51 2 1.058 26.87 .300 7.62 1.220 30.99 .089 2.26 3 - - - - 1.220 30.99 - - 1 1.450 36.84 .361 9.17 1.805 45.86 .117 2.97 100 2 1.562 39.68 .338 8.58 1.805 45.86 .117 2.97 3 - - - - 1.805 45.86 .117 2.97 panel mounting dimensions panel cutout dimensions 5 call toll free: 1 (800) 323-9612
5-12 5 call toll free: 1 (800) 323-9612 dura-con high reliability mounting hardware .050" (1.27mm) density solder cup/wire d-microminiature mounting hardware for plastic & metal shell dura-con connectors option ?f? option ?r? option ?k? option ?l? option ?p?
5-13 5 call toll free: 1 (800) 323-9612 dura-con high reliability mounting hardware .050" (1.27mm) density solder cup/wire d-microminiature jackpost - rear panel mount (purchased separately) panel cutout dimensions (plug & receptacle) p/n: dcsl1 purchased separately jackpost part panel thickness a dimension number in mm in mm DCJPRM094 .094 2.5 .092/.087 2.34/2.21 dcjprm063 .063 1.6 .061/.056 1.55/1.42 dcjprm047 .047 1.2 .047/.042 1.19/1.07 dcjprm031 .031 0.8 .030/.025 0.76/0.64 part a b c number +.004 (.101) +.004 (.101) (by shell -.000 (.000) -.000 (.000) + .005 (.127) size) in mm in mm in mm 9 .398 10.11 .249 6.32 .565 14.35 15 .548 13.92 .249 6.32 .715 18.16 21 .698 17.73 .249 6.32 .865 21.97 25 .798 20.27 .249 6.32 .965 24.51 31 .948 24.08 .249 6.32 1.115 28.34 37 1.098 27.89 .249 6.32 1.265 32.13 51 1.048 26.62 .292 7.42 1.215 30.86 100 1.448 36.78 .336 8.53 1.800 45.72
5-14 call toll free: 1 (800) 323-9612 f eatures plug & socket versions available in 9, 15, 21, 25, 31, 37, 51, and 100 positions. flow-through design facilitates inspection and cleaning after soldering. all terminal block connectors use standard mounting hardware. metal shell provides emi/rfi shielding capability. available in 3 styles: straight mount, 90 right-angle mount, and 90 right- angle narrow profile mounting. silicone elastomer interfacial seal protects contacts from moisture and isolates them from each other and from the metal shell. meets requirements of mil-c-83513. choice of insulator materials. m aterials insulator: ul94v-0 glass-filled polyester or diallyl phthalate contacts: pins - copper alloy, sockets - copper alloy (machined) contact plating: .000050 in gold shell: aluminum alloy shell plating: yellow chromate over cadmium (std.) or electroless nickel e lectrical current rating: 3 amps maximum withstanding voltage: 600 vac rms @ sea level, 150 vac @ 70,000 ft. contact resistance: 8 milliohms maximum insulation resistance: 1,000 m egohms min between adjacent pins e nvironmental operating temperature: -55 c to +135 c m echanical individual contact: 6 oz. (170.40 g) maximum insertion force; 0.5 oz. (14.20 g) minimum withdrawal force mating / unmating forces: see table dura-con high reliability metal shell .050" (1.27mm) density pcb mount terminal block maximum minimum no. of mating force unmating force contacts lb. kg lb. kg 9 5.63 2.56 .28 .13 15 9.38 4.26 .47 .21 21 13.13 5.96 .66 .30 25 15.63 7.10 .78 .35 31 19.38 8.80 .97 .44 37 23.13 10.50 1.16 .53 51 31.88 14.47 1.59 .72 100 62.50 28.38 3.13 1.42
cinch dura-con d connector insulator t ype c = diallyl phthalate glass reinforced d = thermoplastic glass reinforced mounting t ype m = screw mount metal shell no. of contacts 9, 15, 21, 25, 31, 37, 51, & 100 contact t ype p = pin (plug) s = socket (receptacle) 5-15 call toll free: 1 (800) 323-9612 dura-con high reliability metal shell .050" (1.27mm) density pcb mount terminal block ordering information dc d m 25 s br -- -- * for other options consult factory. shell finish* no letter = standard yellow chromate over cadmium n = electroless nickel har d ware* no letter = less hardware p = jackpost t ermination style br = 90 pcb bs = straight 180 pcb cbr = 90 narrow profile pcb contact arrangements
5-16 dura-con high reliability metal shell .050" (1.27mm) density pcb mount terminal block abc f no. of max. + .007 (0.18) + .005 (0.13) max. contacts in mm in mm in mm in mm 9 plug 1.390 35.31 1.150 29.21 .565 14.35 .465 11.81 9 socket 1.390 35.31 1.150 29.21 .565 14.35 .465 11.81 15 plug 1.540 39.12 1.300 33.02 .715 18.16 .465 11.81 15 socket 1.540 39.12 1.300 33.02 .715 18.16 .465 11.81 21 plug 1.690 42.93 1.450 36.83 .865 21.97 .465 11.81 21 socket 1.690 42.93 1.450 36.83 .865 21.97 .465 11.81 25 plug 1.790 45.47 1.550 39.37 .965 24.51 .465 11.81 25 socket 1.790 45.47 1.550 39.37 .965 24.51 .465 11.81 31 plug 2.040 51.82 1.800 45.72 1.115 28.32 .465 11.81 31 socket 2.040 51.82 1.800 45.72 1.115 28.32 .465 11.81 37 plug 2.340 59.44 2.100 53.34 1.265 32.13 .465 11.81 37 socket 2.340 59.44 2.100 53.34 1.265 32.13 .465 11.81 51 plug 1.875 47.63 1.600 40.64 1.215 30.86 .565 14.35 51 socket 1.875 47.63 1.600 40.64 1.215 30.86 .565 14.35 100 plug 2.780 70.61 2.500 63.50 1.800 45.72 .765 19.43 100 socket 2.780 70.61 2.500 63.50 1.800 45.72 .765 19.43 gh j k no. of max. max. + .005 (0.13) + .015 contacts in mm in mm in mm in mm 9 plug .308 7.82 .190 4.83 .096 2.44 .125 3.18 9 socket .308 7.82 .200 5.08 .096 2.44 .125 3.18 15 plug .308 7.82 .190 4.83 .096 2.44 .125 3.18 15 socket .308 7.82 .200 5.08 .096 2.44 .125 3.18 21 plug .308 7.82 .190 4.83 .096 2.44 .125 3.18 21 socket .308 7.82 .200 5.08 .096 2.44 .125 3.18 25 plug .308 7.82 .190 4.83 .096 2.44 .125 3.18 25 socket .308 7.82 .200 5.08 .096 2.44 .125 3.18 31 plug .308 7.82 .190 4.83 .096 2.44 .125 3.18 31 socket .308 7.82 .200 5.08 .096 2.44 .125 3.18 37 plug .308 7.82 .190 4.83 .096 2.44 .125 3.18 37 socket .308 7.82 .200 5.08 .096 2.44 .125 3.18 51 plug .351 8.92 .190 4.83 .096 2.44 .125 3.18 51 socket .351 8.92 .200 5.08 .096 2.44 .125 3.18 100 plug .394 10.00 .190 4.83 .125 3.18 .225 5.72 100 socket .394 10.00 .200 5.08 .125 3.18 .225 5.72 note: for additional connector dimensions, see page 5-10. recommended board layout typ. hole dia. = .040" (1.02 mm) 5 call toll free: 1 (800) 323-9612
5-17 dura-con high reliability metal shell .050" (1.27mm) density pcb mount terminal block a b c d g no. of max. + .007 (0.18) + .005 (0.13) max. max. contacts in mm in mm in mm in mm in mm 9 plug 1.390 35.31 1.150 29.21 .565 14.35 .885 22.48 .308 7.75 9 socket 1.390 35.31 1.150 29.21 .565 14.35 .885 22.48 .308 7.75 15 plug 1.390 35.31 1.150 29.21 .715 18.16 .945 24.0 .308 7.75 15 socket 1.390 35.31 1.150 29.21 .715 18.16 .945 24.0 .308 7.75 21 plug 1.690 42.93 1.450 36.83 .865 21.97 1.185 30.09 .308 7.75 21 socket 1.690 42.93 1.450 36.83 .865 21.97 1.185 30.09 .308 7.75 25 plug 1.740 44.20 1.500 38.10 .965 24.51 1.275 32.38 .308 7.75 25 socket 1.740 44.20 1.500 38.10 .965 24.51 1.275 32.38 .308 7.75 31 plug 2.040 51.82 1.800 45.72 1.115 28.32 1.575 40.00 .308 7.75 31 socket 2.040 51.82 1.800 45.72 1.115 28.32 1.576 40.00 .308 7.75 37 plug 2.340 59.44 2.100 53.34 1.265 32.13 1.875 47.62 .308 7.75 37 socket 2.340 59.44 2.100 53.34 1.265 32.13 1.875 47.62 .308 7.75 51 plug 2.270 57.66 2.000 50.80 1.215 30.86 1.775 45.08 .351 8.92 51 socket 2.270 57.66 2.000 50.80 1.215 30.86 1.775 45.08 .351 8.92 100 plug 3.070 77.98 2.800 71.12 1.800 45.72 2.585 65.55 .455 11.56 100 socket 3.070 77.98 2.800 71.12 1.800 45.72 2.585 65.65 .455 11.56 h j k l no. of max. + .005 (0.13) max. max. contacts in mm in mm in mm in mm 9 plug .190 4.83 .096 2.44 .165 4.19 .355 9.02 9 socket .200 5.08 .096 2.44 .165 4.19 .355 9.02 15 plug .190 4.83 .096 2.44 .165 4.19 .355 9.02 15 socket .200 5.08 .096 2.44 .165 4.19 .355 9.02 21 plug .190 4.83 .096 2.44 .165 4.19 .355 9.02 21 socket .200 5.08 .096 2.44 .165 4.19 .355 9.02 25 plug .190 4.83 .096 2.44 .165 4.19 .355 9.02 25 socket .200 5.08 .096 2.44 .165 4.19 .355 9.02 31 plug .190 4.83 .096 2.44 .165 4.19 .355 9.02 31 socket .200 5.08 .096 2.44 .165 4.19 .355 9.02 37 plug .190 4.83 .096 2.44 .165 4.19 .355 9.02 37 socket .200 5.08 .096 2.44 .165 4.19 .355 9.02 51 plug .190 4.83 .096 2.44 .165 4.19 .355 9.02 51 socket .200 5.08 .096 2.44 .165 4.19 .355 9.02 100 plug .190 4.83 .125 3.18 .300 7.62 .550 13.97 100 socket .200 5.08 .125 3.18 .300 7.62 .550 13.97 note: for additional connector dimensions, see page 5-10. recommended board layout typ. hole dia. = .040" (1.02 mm) straight (180) termination 5 call toll free: 1 (800) 323-9612
5-18 call toll free: 1 (800) 323-9612 5 dura-con high reliability metal shell .050" (1.27mm) density pcb mount terminal block abc no. of max. + .005 (0.13) max. contacts in mm in mm in mm 9 plug .785 19.94 .565 14.35 .308 7.82 9 socket .785 19.94 .565 14.35 .308 7.82 15 plug .935 23.75 .715 18.16 .308 7.82 15 socket .935 23.75 .715 18.16 .308 7.82 21 plug 1.085 27.56 .865 21.97 .308 7.82 21 socket 1.085 27.56 .865 21.97 .308 7.82 25 plug 1.085 30.10 .965 24.51 .308 7.82 25 socket 1.185 30.10 .965 24.51 .308 7.82 31 plug 1.335 33.91 1.115 28.32 .308 7.82 31 socket 1.335 33.91 1.115 28.32 .308 7.82 37 plug 1.485 37.72 1.265 32.13 .308 7.82 37 socket 1.485 37.72 1.265 32.13 .308 7.82 51 plug 1.435 36.45 1.215 30.86 .351 8.92 51 socket 1.435 36.45 1.215 30.86 .351 8.92 100 plug 2.175 55.25 1.800 45.72 .394 10.00 100 socket 2.175 55.25 1.800 45.72 .394 10.00 fg h j no. of + .010 (0.25) + .010 (0.25) max. + .005 (0.13) contacts in mm in mm in mm in mm 9 plug .230 5.84 .250 6.35 .420 10.67 .096 2.44 9 socket .230 5.84 .250 6.35 .420 10.67 .096 2.44 15 plug .130 3.30 .250 6.35 .420 10.67 .096 2.44 15 socket .130 3.30 .250 6.35 .420 10.67 .096 2.44 21 plug .130 3.30 .250 6.35 .420 10.67 .096 2.44 21 socket .130 3.30 .250 6.35 .420 10.67 .096 2.44 25 plug .130 3.30 .250 6.35 .420 10.67 .096 2.44 25 socket .130 3.30 .250 6.35 .420 10.67 .096 2.44 31 plug .130 3.30 .250 6.35 .520 13.21 .996 2.44 31 socket .130 3.30 .250 6.35 .520 13.21 .096 2.44 37 plug .130 3.30 .250 6.35 .520 13.21 .096 2.44 37 socket .130 3.30 .250 6.35 .520 13.21 .096 2.44 51 plug .150 3.81 .300 7.62 .650 16.51 .096 2.44 51 socket .150 3.81 .300 7.62 .650 16.51 .096 2.44 100 plug .200 5.08 .400 10.16 1.000 25.40 .125 3.18 100 socket .200 5.08 .400 10.16 1.000 25.40 .125 3.18 note: for additional connector dimensions, see page 5-10. recommended board layout typ. hole dia. = .040" (1.02 mm)
5-20 call toll free: 1 (800) 323-9612 f eatures all-plastic and metal shell wire versions available in solder cup, gold-plated solid wire, and insulated stranded wire. pcb mount ?terminal block? type connectors available in straight or right angle. sizes offered - 9, 15, 21, 25, 31, 35, 51, and 100 (metal shell only). all products are qualified to the requirements of mil-c-83513 and marked with the m83513 part number. optional shell platings and insulator materials offer high performance in harsh environments. mounting hardware per mil-c-83513. m aterials insulator: ul94v-0 rated glass-filled polyester per mil-m-24519 or diallyl phthalate (dap) per mil-m-14. contacts: pins - copper alloy, sockets - copper alloy contact plating: .000050 in gold per mil-g-45204 shell material (metal shell only): aluminum alloy shell plating (metal shell only): yellow chromate over cadmium (std.) or electroless nickel e lectrical current rating: 3 amps maximum withstanding voltage: 600 vac rms @ sea level contact resistance: 8 milliohms maximum e nvironmenta l operating temperature: -55 c to +125 c m echanical durability: 500 mate/unmate cycles individual contact: forces 6 oz. (170.40 g) maximum insertion; 0.5 oz. (14.20 g) minimum withdrawal mating / unmating force: see table dura-con high reliability mil-c-83513 .050" (1.27mm) density solder cup/wire d-microminiature maximum minimum no. of mating force unmating force contacts lb. kg lb. kg 9 5.63 2.56 .28 .13 15 9.38 4.26 .47 .21 21 13.13 5.96 .66 .30 25 15.63 7.10 .78 .35 31 19.38 8.80 .97 .44 37 23.13 10.50 1.16 .53 51 31.88 14.47 1.59 .72
5-21 call toll free: 1 (800) 323-9612 dura-con high reliability mil-c-83513 .050" (1.27mm) density solder cup/wire d-microminiature - metal shell ordering information m83513/04 - a 03 c connector t ype 01 - metal shell d plugs with solder cup termination 02 - metal shell d sockets with solder cup termination 03 - metal shell d plugs with wire leads 04 - metal shell d sockets with wire leads inser t arrang ements (no. of contacts) a = 9 b = 15 c = 21 d = 25 e = 31 f = 37 g = 51 h = 100 shell finish c = cadmium n = electroless nickel wire t ype (use onl y f or /03 & /04, otherwise omit) 01 - m22759/11-26-9, 18 inches, white (see note below) 02 - m22759/11-26-9, 36 inches, white (see note below) 03 - m22759/11-26-( ), 18 inches, color coded (see note below) 04 - m22759/11-26-( ), 36 inches, color coded (see note below) 05 - qq-w-343, 25 awg, 0.5 inch, gold-plated 06 - qq-w-343, 25 awg, 1.0 inch, gold-plated 07 - qq-w-343, 25 awg, 0.5 inch, tin-plated 08 - qq-w-343, 25 awg, 1.0 inch, tin-plated 09 - m22759/33-26-9, 18 inches, white 10 - m22759/33-26-9, 36 inches, white 11 - m22759/33-26-( ), 18 inches, color coded 12 - m22759/33-26-( ), 36 inches, color coded 13 - m22759/11-26-9, 72 inches, white 14 - m22759/11-26-( ), 72 inches, color coded 15 - m22759/33-26-9, 72 inches, white 16 - m22759/33-26-( ), 72 inches, color coded note: see page 5-31 for m83513 mounting hardware. contact arrangements (face view of pin insert) (use reverse order for socket side) metal shell
5-22 5 call toll free: 1 (800) 323-9612 dura-con high reliability mil-c-83513 .050" (1.27mm) density solder cup/wire d-microminiature - metal shell a b max. (plug) c d e f max. min. (socket) + .010" (.254) no. .010" (.254) - .018" (.457) .005" (.127) .010" (.254) of contacts in mm in mm in mm in mm in mm in mm 9 plug .775 19.68 .3338 8.48 .390 9.91 .565 14.35 .298 7.57 .270 6.68 9 socket .775 19.68 .3342 8.49 .390 9.91 .565 14.35 .298 7.57 .270 6.68 15 plug .925 23.50 .4838 12.29 .540 13.72 .715 18.16 .298 7.57 .270 6.68 15 socket .925 23.50 .4842 12.30 .540 13.72 .715 18.16 .298 7.57 .270 6.68 21 plug 1.075 27.30 .6338 16.10 .690 17.53 .865 21.97 .298 7.57 .270 6.68 21 socket 1.075 27.30 .6342 16.11 .690 17.53 .865 21.97 .298 7.57 .270 6.68 25 plug 1.175 29.84 .7338 18.64 .790 20.07 .965 24.51 .298 7.57 .270 6.68 25 socket 1.175 29.84 .7342 18.65 .790 20.07 .965 24.51 .298 7.57 .270 6.68 31 plug 1.325 33.66 .8838 22.45 .940 23.88 1.115 28.32 .298 7.57 .270 6.68 31 socket 1.325 33.66 .8842 22.46 .940 23.88 1.115 28.32 .298 7.57 .270 6.68 37 plug 1.475 37.46 1.0338 26.26 1.090 27.69 1.265 32.13 .298 7.57 .270 6.68 37 socket 1.475 37.46 1.0342 26.27 1.090 27.69 1.265 32.13 .298 7.57 .270 6.68 51 plug 1.425 36.20 .9838 24.99 1.040 26.42 1.215 30.86 .341 8.66 .310 7.87 51 socket 1.425 36.20 .9842 25.00 1.040 26.42 1.215 30.86 .341 8.66 .310 7.87 100 plug 2.160 54.86 1.3838 35.15 1.432 36.38 1.800 45.71 .384 9.75 .360 9.15 100 socket 2.160 54.86 1.3842 35.16 1.432 36.38 1.800 45.71 .384 9.75 .360 9.15 connector dimensions - metal shell plug socket
5-23 5 call toll free: 1 (800) 323-9612 dura-con high reliability mil-c-83513 .050" (1.27mm) density solder cup/wire d-microminiature - metal shell panel mounting dimensions - metal shell panel cutout dimensions - metal shell ab cd +.004" (.101mm) +.004" (.101mm) +.005" (.127mm) +.005" (.127mm) no. of -.000" (.000mm) -.000" (.000mm) -.000" (.000mm) -.000" (.000mm) contacts in mm in mm in mm in mm 9 .408 10.36 .270 6.86 .570 14.48 .089 2.26 15 .558 14.17 .270 6.86 .720 14.48 .089 2.26 21 .708 17.98 .270 6.86 .870 22.10 .089 2.26 25 .808 20.52 .270 6.86 .970 24.64 .089 2.26 31 .958 24.33 .270 6.86 1.120 28.45 .089 2.26 37 1.108 28.14 .270 6.86 1.270 32.26 .089 2.26 51 1.058 26.87 .315 8.00 1.220 30.99 .089 2.26 100 1.450 36.84 .361 9.17 1.805 45.86 .117 2.97 front mounting rear mounting ab cd +.004" (.101mm) +.004" (.101mm) +.005" (.127mm) +.005" (.127mm) no. of -.000" (.000mm) -.000" (.000mm) -.000" (.000mm) -.000" (.000mm) contacts in mm in mm in mm in mm 9 .408 10.36 .256 6.50 .570 14.48 .089 2.26 15 .558 14.17 .256 6.50 .720 18.29 .089 2.26 21 .708 17.98 .256 6.50 .870 22.10 .089 2.26 25 .808 20.52 .256 6.50 .970 24.64 .089 2.26 31 .958 24.33 .256 6.50 1.120 28.45 .089 2.26 37 1.108 28.14 .256 6.50 1.270 32.26 .089 2.26 51 1.058 26.87 .300 7.62 1.220 30.99 .089 2.26 100 1.450 36.84 .338 8.58 1.805 45.86 .117 2.97 cd no. of +.005" (.127mm) +.005" (.127mm) contacts -.000" (.000mm) -.000" (.000mm) in mm in mm 9 .570 14.48 .089 2.26 15 .720 18.29 .089 2.26 21 .870 22.10 .089 2.26 25 .970 24.64 .089 2.26 31 1.120 28.45 .089 2.26 37 1.270 32.26 .089 2.26 51 1.220 30.99 .089 2.26 100 1.805 45.86 .117 2.97 edgeboard mounting panel mounting dimensions
5-24 5 call toll free: 1 (800) 323-9612 dura-con high reliability mil-c-83513 .050" (1.27mm) density solder cup/wire d-microminiature - plastic ordering information m83513/06 -a 04 connector t ype 06 - plastic shell plugs with solder cup termination 07 - plastic shell sockets with solder cup termination 08 - plastic shell plugs with wire leads 09 - plastic shell sockets with wire leads inser t arrang ements (no. of contacts) a = 9 b = 15 c = 21 d = 25 e = 31 f = 37 g = 51 wire t ype (use onl y f or /08 & /09, otherwise omit) 01 - m22759/11-26-9, 18 inches, white 02 - m22759/11-26-9, 36 inches, white 03 - m22759/11-26-( ), 18 inches, color coded 04 - m22759/11-26-( ), 36 inches, color coded 05 - qq-w-343, 25 awg, 0.5 inch, gold-plated 06 - qq-w-343, 25 awg, 1.0 inch, gold-plated 07 - qq-w-343, 25 awg, 0.5 inch, tin-plated 08 - qq-w-343, 25 awg, 1.0 inch, tin-plated 09 - m22759/33-26-9, 18 inches, white 10 - m22759/33-26-9, 36 inches, white 11 - m22759/33-26-( ), 18 inches, color coded 12 - m22759/33-26-( ), 36 inches, color coded 13 - m22759/11-26-9, 72 inches, white 14 - m22759/11-26-( ), 72 inches, color coded 15 - m22759/33-26-9, 72 inches, white 16 - m22759/33-26-( ), 72 inches, color coded note: see page 5-31 for m83513 mounting hardware. contact arrangements (face view of pin insert) (use reverse order for socket side) plastic shell
5-25 dura-con high reliability mil-c-83513 .050" (1.27mm) density solder cup/wire/pcb d-microminiature - plastic a b max. (plug) c d e f max. min. (socket) +.010" (.254) no. .010" (.254) -.018" (.457) .005" (.127) .010" (.254) of contacts in mm in mm in mm in mm in mm in mm 9 plug .778 19.76 .2918 7.41 .398 10.11 .565 14.35 .208 5.28 .173 4.39 9 socket .778 19.76 .2922 7.42 .398 10.11 .565 14.35 .208 5.28 .173 4.39 15 plug .928 23.57 .4418 11.22 .548 13.92 .715 18.16 .208 5.28 .173 4.39 15 socket .928 23.57 .4422 11.23 .548 13.92 .715 18.16 .208 5.28 .173 4.39 21 plug 1.078 27.38 .5918 15.03 .698 17.73 .865 21.97 .208 5.28 .173 4.39 21 socket 1.078 27.38 .5922 15.04 .698 17.73 .865 21.97 .208 5.28 .173 4.39 25 plug 1.178 29.92 .6918 17.57 .798 20.27 .965 24.51 .208 5.28 .173 4.39 25 socket 1.178 29.92 .6922 17.58 .798 20.27 .965 24.51 .208 5.28 .173 4.39 31 plug 1.328 33.73 .8418 21.38 .948 24.08 1.115 28.32 .208 5.28 .173 4.39 31 socket 1.328 33.73 .8422 21.39 .948 24.08 1.115 28.32 .208 5.28 .173 4.39 37 plug 1.478 37.54 .9918 25.19 1.098 27.89 1.265 32.13 .208 5.28 .173 4.39 37 socket 1.478 37.54 .9922 25.20 1.098 27.89 1.265 32.13 .208 5.28 .173 4.39 51 plug 1.428 36.27 .9418 23.92 1.048 26.62 1.215 30.86 .250 6.35 .220 5.59 51 socket 1.428 36.27 .9422 23.93 1.048 26.62 1.215 30.86 .250 6.35 .220 5.59 shell dimensions - (all-plastic version) plug socket 5 call toll free: 1 (800) 323-9612
5-26 5 call toll free: 1 (800) 323-9612 dura-con high reliability mil-c-83513 .050" (1.27mm) density solder cup/wire/pcb d-microminiature - plastic front mounting rear mounting edgeboard mounting ab c +.004" (.101mm) +.004" (.101mm) +.005" (.127mm) no. of -.000" (.000mm) -.000" (.000mm) -.000" (.000mm) contacts in mm in mm in mm 9 .408 10.36 .172 4.37 .570 14.48 15 .558 14.17 .172 4.37 .720 14.48 21 .708 17.98 .172 4.37 .870 22.10 25 .808 20.52 .172 4.37 .970 24.64 31 .958 24.33 .172 4.37 1.120 28.45 37 1.108 28.14 .172 4.37 1.270 32.26 51 1.058 26.87 .215 5.46 1.220 30.99 ab c +.004" (.101mm) +.004" (.101mm) +.005" (.127mm) no. of -.000" (.000mm) -.000" (.000mm) -.000" (.000mm) contacts in mm in mm in mm 9 .373 9.47 .216 5.49 .570 14.48 15 .523 13.28 .216 5.49 .720 18.29 21 .674 17.12 .216 5.49 .870 22.10 25 .774 19.66 .216 5.49 .970 24.64 31 .924 23.47 .216 5.49 1.120 28.45 37 1.074 27.28 .216 5.49 1.270 32.26 51 1.024 26.01 .259 6.58 1.220 30.99 d +.005" (.127mm) no. of -.000" (.000mm) contacts in mm 9 .570 14.48 15 .720 18.29 21 .870 22.10 25 .970 24.64 31 1.120 28.45 37 1.270 32.26 51 1.220 30.99 panel cutout dimensions rear cutout dimensions edgeboard mounting cutout dimensions panel mounting dimensions - all-plastic
5-27 5 call toll free: 1 (800) 323-9612 dura-con high reliability mil-c-83513 .050" (1.27mm) density d-microminiature pc board mount contact arrangements (face view of pin insert) (use reverse order for socket side) ordering information terminal block m83513/10 - c 02 c n connector description 10 = plug, 9-37 pos., narrow profile, rt. angle 11 = plug, 51 pos., narrow profile, rt. angle 12 = plug, 100 pos., narrow profile, rt. angle 13 = socket, 9-37 pos., narrow profile, rt. angle 14 = socket, 51 pos., narrow profile, rt. angle 15 = socket, 100 pos., narrow profile, rt. angle 16 = plug, 9-37 pos., std. profile, rt. angle 17 = plug, 51 pos., std. profile, rt. angle 18 = plug, 100 pos., std. profile, rt. angle 19 = socket, 9-37 pos., std. profile, rt. angle 20 = socket, 51 pos., std. profile, rt. angle 21 = socket, 100 pos., std. profile, rt. angle 22 = plug, 9-37 pos., straight mount 23 = plug, 51 pos., straight mount 24 = plug, 100 pos., straight mount 25 = socket, 9-37 pos., straight mount 26 = socket, 51 pos., straight mount 27 = socket, 100 pos., straight mount har d ware n = no jackpost p = jackpost attached shell finish c = cadmium n = electroless nickel t ermination length 01 = 0.109 02 = 0.140 03 = 0.172 inser t arrang ement length (no. of contacts) a = 9 b = 15 c = 21 d = 25 e = 31 f = 37 g = 51 h = 100
5-28 5 call toll free: 1 (800) 323-9612 dura-con high reliability mil-c-83513 .050" (1.27mm) density solder cup/wire/pcb d-microminiature abc f no. of max. .007 (0.18) .005 (0.13) max. contacts in mm in mm in mm in mm 9 plug 1.390 35.31 1.150 29.21 .565 14.35 .465 11.81 9 socket 1.390 35.31 1.150 29.21 .565 14.35 .465 11.81 15 plug 1.540 39.12 1.300 33.02 .715 18.16 .465 11.81 15 socket 1.540 39.12 1.300 33.02 .715 18.16 .465 11.81 21 plug 1.690 42.93 1.450 36.83 .865 21.97 .465 11.81 21 socket 1.690 42.93 1.450 36.83 .865 21.97 .465 11.81 25 plug 1.790 45.47 1.550 39.37 .965 24.51 .465 11.81 25 socket 1.790 45.47 1.550 39.37 .965 24.51 .465 11.81 31 plug 2.040 51.82 1.800 45.72 1.115 28.32 .465 11.81 31 socket 2.040 51.82 1.800 45.72 1.115 28.32 .465 11.81 37 plug 2.340 59.44 2.100 53.34 1.265 32.13 .465 11.81 37 socket 2.340 59.44 2.100 53.34 1.265 32.13 .465 11.81 51 plug 1.875 47.63 1.600 40.64 1.215 30.86 .565 14.35 51 socket 1.875 47.63 1.600 40.64 1.215 30.86 .565 14.35 100 plug 2.780 70.61 2.500 63.50 1.800 45.72 .765 19.43 100 socket 2.780 70.61 2.500 63.50 1.800 45.72 .765 19.43 gh j k no. of max. max. .005 (0.13) .015 contacts in mm in mm in mm in mm 9 plug .308 7.82 .190 4.83 .096 2.44 .125 3.18 9 socket .308 7.82 .200 5.08 .096 2.44 .125 3.18 15 plug .308 7.82 .190 4.83 .096 2.44 .125 3.18 15 socket .308 7.82 .200 5.08 .096 2.44 .125 3.18 21 plug .308 7.82 .190 4.83 .096 2.44 .125 3.18 21 socket .308 7.82 .200 5.08 .096 2.44 .125 3.18 25 plug .308 7.82 .190 4.83 .096 2.44 .125 3.18 25 socket .308 7.82 .200 5.08 .096 2.44 .125 3.18 31 plug .308 7.82 .190 4.83 .096 2.44 .125 3.18 31 socket .308 7.82 .200 5.08 .096 2.44 .125 3.18 37 plug .308 7.82 .190 4.83 .096 2.44 .125 3.18 37 socket .308 7.82 .200 5.08 .096 2.44 .125 3.18 51 plug .351 8.92 .190 4.83 .096 2.44 .125 3.18 51 socket .351 8.92 .200 5.08 .096 2.44 .125 3.18 100 plug .394 10.00 .190 4.83 .125 3.18 .225 5.72 100 socket .394 10.00 .200 5.08 .125 3.18 .225 5.72 note: for additional connector dimensions, see page 5-22. recommended board layout typ. hole dia. = .040" (1.02 mm) (/16-/21)
5-29 5 call toll free: 1 (800) 323-9612 dura-con high reliability mil-c-83513 .050" (1.27mm) density solder cup/wire/pcb d-microminiature ab c d g no. of max. .007 (0.18) .005 (0.13) max. max. contacts in mm in mm in mm in mm in mm 9 plug 1.390 35.31 1.150 29.21 .565 14.35 .885 22.48 .308 7.75 9 socket 1.390 35.31 1.150 29.21 .565 14.35 .885 22.48 .308 7.75 15 plug 1.390 35.31 1.150 29.21 .715 18.16 .945 24.0 .308 7.75 15 socket 1.390 35.31 1.150 29.21 .715 18.16 .945 24.0 .308 7.75 21 plug 1.690 42.93 1.450 36.83 .865 21.97 1.185 30.09 .308 7.75 21 socket 1.690 42.93 1.450 36.83 .865 21.97 1.185 30.09 .308 7.75 25 plug 1.740 44.20 1.500 38.10 .965 24.51 1.275 32.38 .308 7.75 25 socket 1.740 44.20 1.500 38.10 .965 24.51 1.275 32.38 .308 7.75 31 plug 2.040 51.82 1.800 45.72 1.115 28.32 1.575 40.00 .308 7.75 31 socket 2.040 51.82 1.800 45.72 1.115 28.32 1.576 40.00 .308 7.75 37 plug 2.340 59.44 2.100 53.34 1.265 32.13 1.875 47.62 .308 7.75 37 socket 2.340 59.44 2.100 53.34 1.265 32.13 1.875 47.62 .308 7.75 51 plug 2.270 57.66 2.000 50.80 1.215 30.86 1.775 45.08 .351 8.92 51 socket 2.270 57.66 2.000 50.80 1.215 30.86 1.775 45.08 .351 8.92 100 plug 3.070 77.98 2.800 71.12 1.800 45.72 2.585 65.55 .455 11.56 100 socket 3.070 77.98 2.800 71.12 1.800 45.72 2.585 65.65 .455 11.56 hj k l no. of max. .005 (0.13) max. max. contacts in mm in mm in mm in mm 9 plug .190 4.83 .096 2.44 .165 4.19 .355 9.02 9 socket .200 5.08 .096 2.44 .165 4.19 .355 9.02 15 plug .190 4.83 .096 2.44 .165 4.19 .355 9.02 15 socket .200 5.08 .096 2.44 .165 4.19 .355 9.02 21 plug .190 4.83 .096 2.44 .165 4.19 .355 9.02 21 socket .200 5.08 .096 2.44 .165 4.19 .355 9.02 25 plug .190 4.83 .096 2.44 .165 4.19 .355 9.02 25 socket .200 5.08 .096 2.44 .165 4.19 .355 9.02 31 plug .190 4.83 .096 2.44 .165 4.19 .355 9.02 31 socket .200 5.08 .096 2.44 .165 4.19 .355 9.02 37 plug .190 4.83 .096 2.44 .165 4.19 .355 9.02 37 socket .200 5.08 .096 2.44 .165 4.19 .355 9.02 51 plug .190 4.83 .096 2.44 .165 4.19 .355 9.02 51 socket .200 5.08 .096 2.44 .165 4.19 .355 9.02 100 plug .190 4.83 .125 3.18 .300 7.62 .550 13.97 100 socket .200 5.08 .125 3.18 .300 7.62 .550 13.97 note: for additional connector dimensions, see page 5-22. recommended board layout straight (180) termination (/22-/27) typ. hole dia. = .040" (1.02 mm)
5-30 5 call toll free: 1 (800) 323-9612 dura-con high reliability mil-c-83513 .050" (1.27mm) density solder cup/wire/pcb d-microminiature a b c no. of max. .005 (0.13) max. contacts in mm in mm in mm 9 plug .785 19.94 .565 14.35 .308 7.82 9 socket .785 19.94 .565 14.35 .308 7.82 15 plug .935 23.75 .715 18.16 .308 7.82 15 socket .935 23.75 .715 18.16 .308 7.82 21 plug 1.085 27.56 .865 21.97 .308 7.82 21 socket 1.085 27.56 .865 21.97 .308 7.82 25 plug 1.085 30.10 .965 24.51 .308 7.82 25 socket 1.185 30.10 .965 24.51 .308 7.82 31 plug 1.335 33.91 1.115 28.32 .308 7.82 31 socket 1.335 33.91 1.115 28.32 .308 7.82 37 plug 1.485 37.72 1.265 32.13 .308 7.82 37 socket 1.485 37.72 1.265 32.13 .308 7.82 51 plug 1.435 36.45 1.215 30.86 .351 8.92 51 socket 1.435 36.45 1.215 30.86 .351 8.92 100 plug 2.175 55.25 1.800 45.72 .394 10.00 100 socket 2.175 55.25 1.800 45.72 .394 10.00 fg h j no. of .010 (0.25) .010 (0.25) max. .005 (0.13) contacts in mm in mm in mm in mm 9 plug .230 5.84 .250 6.35 .420 10.67 .096 2.44 9 socket .230 5.84 .250 6.35 .420 10.67 .096 2.44 15 plug .130 3.30 .250 6.35 .420 10.67 .096 2.44 15 socket .130 3.30 .250 6.35 .420 10.67 .096 2.44 21 plug .130 3.30 .250 6.35 .420 10.67 .096 2.44 21 socket .130 3.30 .250 6.35 .420 10.67 .096 2.44 25 plug .130 3.30 .250 6.35 .420 10.67 .096 2.44 25 socket .130 3.30 .250 6.35 .420 10.67 .096 2.44 31 plug .130 3.30 .250 6.35 .520 13.21 .996 2.44 31 socket .130 3.30 .250 6.35 .520 13.21 .096 2.44 37 plug .130 3.30 .250 6.35 .520 13.21 .096 2.44 37 socket .130 3.30 .250 6.35 .520 13.21 .096 2.44 51 plug .150 3.81 .300 7.62 .650 16.51 .096 2.44 51 socket .150 3.81 .300 7.62 .650 16.51 .096 2.44 100 plug .200 5.08 .400 10.16 1.000 25.40 .125 3.18 100 socket .200 5.08 .400 10.16 1.000 25.40 .125 3.18 note: for additional connector dimensions, see page 5-22. recommended board layout typ. hole dia. = .040" (1.02 mm) (/10-/15)
5-31 5 call toll free: 1 (800) 323-9612 dura-con high reliability mil-c-83513 .050" (1.27mm) density solder cup/wire/pcb d-microminiature ordering information military type style screwhead thread part no. jackscrew low profile recessed hex 2/56 m83513/5-02 jackscrew high profile recessed hex 2/56 m83513/5-03 jackscrew low profile slotted 2/56 m83513/5-05 jackscrew high profile slotted 2/56 m83513/5-06 jackpost -- -- 2/56 m83513/5-07 jackscrew low profile hex 4/40* m83513/5-12 jackscrew high profile hex 4/40* m83513/5-13 jackscrew low profile slotted 4/40* m83513/5-15 jackscrew high profile slotted 4/40* m83513/5-16 jackpost -- -- 4/40* m83513/5-17 *100 size only mounting hardware
5-32 call toll free: 1 (800) 323-9612 f eatures designed to significantly reduce damage to already mounted dura-con connectors during routine system tests. eliminates numerous mating & unmating cycles experienced by connectors on test harnesses. plug connector on one end, socket connector on the other. available in all-plastic (polyester) or in metal shell with diallyl phthalate or polyester insulators (both ul94v-0 rated). locking hardware must be ordered separately. m aterials insulator: ul94v-0 glass-filled polyester or diallyl phthalate contacts: copper alloy contact plating: .000050 in gold shell (metal only): aluminum alloy shell plating: yellow chromate over cadmium e lectrical current rating: 3 amps maximum withstanding voltage: 600 vac rms @ sea level contact resistance: 8 milliohms maximum m echanical individual contact: insertion force, 6 oz. (170.40 g) maximum; withdrawal force 0.5 oz. (14.20 g) minimum mating / unmating forces: see previous tables dura-con high reliability all-plastic & metal shell .050" (1.27mm) density connector saver metal shell all plastic no. of diallyl phthalate glass-filled polyester glass-filled polyester contacts catalog no. catalog no. catalog no. 9 dccm9cs dcdm9cs dcda9cs 15 dccm15cs dcdm15cs dcda15cs 21 dccm21cs dcdm21cs dcda21cs 25 dccm25cs dcdm25cs dcda25cs 31 dccm31cs dcdm31cs dcda31cs 37 dccm37cs dcdm37cs dcda37cs 51 dccm51cs dcdm51cs dcda51cs 100 dccm100cs dcdm100cs ? e nvironmental operating temperature: -55c to +135c
5-34 call toll free: 1 (800) 323-9612 dura-con high reliability microedge connectors .050" (1.27mm) density pc board mount metal shell e lectrical current rating: 3 amps maximum withstanding voltage: 600 vac rms @ sea level, 300 vac @ 70,000 ft. contact resistance: 8 milliohms maximum e nvironmental operating temperature: -55c to +135c m echanical insertion/withdrawal force: 6 oz. (170.40 g[f]) maximum insertion force, per contact; 0.5 oz. (14.20 g[f]) minimum withdrawal force, per contact f eatures variety of available pc board mounting styles. - ?coke bottle? for edge mounting on double-sided pcbs - right-angle (90 ) mounting for single- or double-sided daughter boards - ?claw foot? leads - gold-plated solid copper wire pigtails harnessing capabilities exist for both plug & socket. standard sizes are 128 and 184 positions. utilizes high-reliability dura-con twist pin contact system assuring electrical continuity under extreme shock and vibration. aluminum shells and diallyl phthalate insulators make dura-con microedge connectors ideal for airborne or space applications. microedge metal shell connectors meet the requirement of mil-c-55302. m aterials insulator: ul94v-0 glass-filled polyester or diallyl phthalate per mil-m-14 (green) contacts: copper alloy contact plating: .000050 in gold shell: aluminum alloy shell plating: electroless nickel
5-35 5 call toll free: 1 (800) 323-9612 dura-con high reliability microedge connectors .050" (1.27mm) density pc board mount metal shell
5-36 5 call toll free: 1 (800) 323-9612 dura-con high reliability microedge connectors * narrow version (dneb) .250 wide .050" (1.27mm) density pc board mount metal shell recommended pcb thickness .047-.062. consult factory for other thicknesses.
5-37 5 call toll free: 1 (800) 323-9612 series prefix dmeb = microedgeboard dneb = microedgeboard, narrow (184 only) contact spacing 1 = .050" (1.27mm) centers 128/184 2 = .100" (2.54mm) centers 64/92 (every other contact hole) for other contact spacing accommodations, consult the factory. no. of contacts 128, 184 contact t ype p = pin s = socket wire siz e in a wg 5 = 25 awg solid copper 6 = 26 awg stranded wire s = solder cup dura-con high reliability microedge connectors 184 contact plug (standard insulated wire) side view shell polarization kit * narrow version (dneb) .250 wide order no. ?l? used on dnebp0l1 .250 dneb narrow only dmebp0l1 .312 dmeb std. width mounting hardware removable jackscrew/jackpost assembly standard jackscrew/jackpost assembly key plug with jackscrew receptacle with jackscrew ordering information dmeb 1 -128 p 6 e 2 180 *indicates cinch std option lead length in inc hes termination, color of finish 1 = white *2 = yellow 3 = tin-plated *4 = gold-plated (solid copper wire only) *5 = color coded per mil-std. 681, system 1 wire t ype/t ermination style c = solid copper e = mil-w-16878/4, 7 strand bs = pc board (coke bottle) bra = pc board right-angle (formed to ?a? side) brb = pc board right-angle (formed to ?b? side) w = pc board (claw foot) consult factory if required. l .050" (1.27mm) density pc board mount metal shell
5-38 call toll free: 1 (800) 323-9612 f eatures lightweight. slim profile. high-density interconnect. high-reliability dura-con twist pin contact system for extreme shock & vibration applications. optional polarization with guide pins to prevent mismating connectors. plug & socket available in sizes from 1 to 60 positions. m aterials insulator: ul94v-0 glass-filled polyester contacts: copper alloy contact plating: .000050 in gold e lectrical current rating: 3 amps maximum withstanding voltage: 600 vac @ sea level; 150 vac @ 70,000 ft. contact resistance: 8 milliohms maximum e nvironmental operating temperature: -55c to +135c m echanical insertion & withdrawal force (per contact): 6 oz. (170.40 g[f]) maximum insertion; 0.5 oz. (14.20 g[f]) minimum withdrawal dura-con high reliability strip connectors .050" (1.27mm) density solder cup/wire all-plastic
5-39 call toll free: 1 (800) 323-9612 cinc h dura-con strip thermoplastic glass-reinforced strip connector contact center s a = .050 (24 ga.) contact p osition 1 = contacts in every position no. of contact p ositions 1 through 60** contact t ype p = pin s = socket wire siz e in a wg 5 = 25 awg solid copper wire 6 = 26 awg stranded wire s = solder cup (skip to guide pin field if necessary) dura-con high reliability strip connectors .050" (1.27mm) density solder cup/wire all plastic * - indicates cinch std. option. ** - consult factory for larger sizes and multi-row. dimensions socket connector pin connector 24 gauge stainless steel guide pin* cs a 1 10 p 4 c 4 -00.5 g guide pin (socket only) empty ca vity (pin onl y) g02 = guide pin position no. 2 gx = special position, consult factory lead length in inches 00.5 solid copper wire only 01.0 solid copper wire only 02.0 solid copper wire only 18.0 stranded wire only 24.0 stranded wire only 36.0 stranded wire only 48.0 stranded wire only insulation color, solid wire finish, solid cup finish 1 = all white *2 = all yellow 3 = tin-plated *4 = gold-plated (solid wire only) *5 = color coded per mil-std. 681, system 1 system 1. (stranded wire only) insulation wire or solid wire t ype c = solid copper e = mil-w-168 78/4, 7 strand * assembly in socket connector only. epoxy ordering information note: dimension a is number of positions less 1 multiplied by .050

▲Up To Search▲

Price & Availability of DCJPRM094

	To Download DCJPRM094 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .